If you looking for Kinechek or Deschner brand products, please send your enquary to :-  go2mgp@gmail.com or Fax: 603-80239743

Gentle Automatic Solution Sdn Bhd

Cushioneer Shock Absorbers

Superior shock absorbers for all industrial uses

Why the Cushioneer is superior

CUSHIonEER shock absorbers decelerate fast moving equipment without bang or bounce. They operate millions of cycles without leaking even one dro of fluid due to their patented rolling diaphragm rod seal. Two types are available, the original “infinitely adjustable” Cushioneer and a new “self adjusting” model. Both models are built to the demanding quality and performance standards developed in over 45 years of manufacture. They use a stainless steel rod hardened on the impact end to provide long wear life and a special alloy all metal piston precision mated to a tool steel cylinder to eliminate sliding seals resulting in higher absorption capacities for their size. The units are also equipped with a flexible rod wiper to prevent dirt, chips and moisture from entering the unit.

Adjustable Cushioneer

Your machinery can run faster than ever before–trouble free! CUSHIonEER shock absorbers are small and streamlined, handy to mount in tight spots, yet powerful enough to solve most shock problems. Available in stroke lengths of ½”, 1″ and 2″ with energy absorption capacity of 2 in. lbs. to 1600 in. lbs.

CUSHIonEERS are unequaled for use with high speed machines because the plunger rod automatically extends instantly when load movement reverses.

CUSHIonEERS are absolutely leak proof in any position because the plunger rod is hermetically sealed by a patented frictionless rolling diaphragm. They won’t leak a dro of fluid unless damaged, so no external-fluid reservoir is needed.

CUSHIonEER shock absorbers are rugged and compact. They protect your machines, permit production speed ups, and save maintenance expense. An average life of millions of cycles is due to the leakproof diaphragm, mirror finish steel cylinder, all metal piston and hardened stainless steel plunger rod, all permanently lubricated. Cushioneers are used on reciprocating slides, flying die cut off machines, roll forming equipment, packaging machines, book binders–anywhere where fast moving equipment must be brought to a smooth stop.

Two types are available, Adjustable and Self-Adjusting.

Self-Adjusting Cushioneer

Adjustable

The classic leak-proof adjustable CUSHIonEER model is ideal for users who require ultimate flexibility for precise, customized deceleration. The adjustable Cushioneer features a patented adjustment mechanism. During a deceleration stroke the piston closes a meshwork of up to 25 fluid escape ports in the high pressure cylinder to smoothly stop the moving load. Rotation of the adjustment knob alters the flow restriction at all escape ports allowing you to dial in a smooth rate of deceleration for fast, slow, heavy or light loads.

Self-Adjusting

Using the design knowledge gained in the development of the adjustable model, a leak-proof “self adjusting” CUSHIonEER has been added to the Deschner line. This unit is ideal for applications with fluctuating impact loads. It provides a simple set up and trouble free operation in an economical unit. The unique “grooved design” contained in the high-pressure cylinder of the self adjusting Cushioneer, is arranged so that the fluid flowing past the piston is increasingly restricted as the piston advances. The groove pattern maintains a steady flow rate even under large changes in impact energy and the ensuing changes in fluid pressure. The result is a shock absorber that AUTOMATICALLY reacts equally well to a wide range of impact loads and provides a smooth stopping action for any load within its capacity. once set up, the self adjusting Cushioneer works reliably — on its own — for millions of cycles.

 

Kinechek Speed Regulators

Speed regulators available in a variety of models

A KINECHEK precisely regulates the speed or feed rate of moving devices. The hardened tool steel high pressure cylinder used in a KINECHEK has a single adjustable orifice through which all the fluid must be metered. The cylinder is precision mated to an all-metal piston (no sliding seal). This makes the plunger rod on a KINECHEK move smoothly at a constant rate throughout the entire stroke length.

KINECHEKs are available in stroke lengths of 1/2″, 1″, 1¼”, 1 1/2”, 2″, 3″, 4″, and 6″ with capacity of up to 1200 lbs. There are no sliding seals, and no heavy springs to make the plunger bind or jerk so KINECHEKS give smooth, consistent control of moving devices whether the force is 2-1/2 or 1200 lbs. Constant speed month after month! Kinecheks are absolutely leakproof in any position because the plunger rod is hermetically sealed by a patented frictionless rolling diaphragm seal. They won’t leak even a dro of fluid a year unless damaged!

More precise in movement than conventional checks because their super-clean silicone fluid is sealed in for life and filtered every stroke. No dirt, dust or lint can contaminate the fluid so the internal flow aperture never silts to cause variation in plunger speed.

Easy to adjust to your exact needs because the range of adjustment is over 300° with a very smooth, gradual rate of change.

High Capacity Kinecheks

High Capacity Kinecheks are also available with a maximum capacity of up to 2400lbs. force and with the same features as regular Slimline Kinecheks.

Each and every Deschner product is tested at 125% of its rated capacity to check constancy, load-holding ability and adjustability.

KINECHEKs are ideal to control the feed rate of pneumatic drills, second operation lathes, mill tables, or any equipment that requires a constant rate of movement.

Slimline Kinecheks	Cushion-Start Kinecheks	Slow Return Kinecheks	Skipchek Kinecheks	PeckChek Kinecheks	Mini Ks	Super Ks