The series universal testing machine is economy and practical. The machine can be used for the stretching,compressing,bending and shearing tests for
The principal machine is compact, economical and practical;
With underneath oil cylinder , fixing gap guilding, simple and reliable;
Protective rubber sheet, prevent foreign body fall into the slide, and protect the jaw clamp and reduce the friction;
A bending bearing directly connect with the worktable, increase the testing space
Motor driver sprockets, chain drives, adjust the space;
Microcomputers table in the source server and electric control cabinet, functional integration of beauty;
A specialized card, full digital and controlling system can draw force- distortion, force-time curves.
The height of the principle is low, which is in favor of transportation and installation of the machine.
Technical indexes |
WEW-100B |
WEW-300B |
WEW-600B |
WEW-1000B |
Maximum test force(kN) |
100 |
300 |
600 |
1000 |
Valid measurement range of test force |
2%~100%FS |
|||
Test force accuracy |
±1% |
|||
Deformation measuring devices |
Extensometer |
|||
Valid measurement range of deformation |
2%~100%FS |
|||
Deformation measurement accuracy |
±0.5% |
|||
Moving measuring |
Optical encode, resolution:0.01mm |
|||
Piston stroke(mm) |
150 |
150 |
150 |
150 |
Tensile Testing space(mm) (including Piston stroke) |
520 |
520 |
520 |
620 |
solidity Testing space(mm) |
420 |
420 |
420 |
520 |
Testing space move system |
General Motors, sprocket chain drive |
|||
The distance between columns(mm) |
460 |
460 |
450 |
510 |
Overload protection |
2%-5% |
|||
Holding diameter of round specimen (mm) |
Ф4~Ф20 |
Ф10~Ф32 |
Ф13~Ф40 |
Ф13~Ф60 (St Ф13~Ф40) |
Holding thickness of flat specimen (mm) |
0~15mm |
0~15mm |
0~30mm (St 0~15) |
0~40mm (St 0~20) |
Holding wide of flat specimen(mm) |
75 |
75 |
80 |
125 |
Press plate size (mm) |
Ф100 |
Ф120 |
Ф160 |
204x204 |
distance of bending support(mm) |
30-400 |
30-400 |
30-500 |
40-500 |
The width of Bending Roll support(mm) |
140 |
|||
Bending curvature(mm) |
100 |
100 |
100 |
130 |
Clipping sample diameter(optional)(mm) |
Ф10 |
Ф10 |
Ф10 |
|
Pump motor power (kw) |
2.2 |
|||
Beam motor power (kw) |
0.37 |
0.37 |
0.37 |
0.55 |
External dimension(mm) |
730*570*1845 |
730*570*1845 |
730*570*1900 |
850*665*2340 |
Control box size(mm) |
|
1020*620*810 |
||
Weight (kg) |
2000 |
2000 |
2000 |
3000 |
Power supply |
|
380V 50 Hz |