SECTION 1. PRODUCT IDENTIFICATION
Product Name : 2K PU CLEAR
SECTION 1.2 General Information
Contact person : Mr. Loo / Ms. Tiew / Ms. Tan
Tel. No : 03-3168 2737
Fax No : 03-3168 6898
SECTION 2. HAZARDOUS INGREDIENTS AND EXPOSURE LIMITS
Chemical Name CAS Number Conc.
PU Resin Proprietary 40-60%
Aromatic Solvent NA 15-25%
Non-Oxygenated Solvent NA 30-35%
Additives NA <2.5%
SECTION 3. HAZARDS IDENTIFICATION
Xn - HARMFUL
Harmful by inhalation and in contact with skin.
Irritating to skin.
FLAMMABLE.
SECTION 4. FIRST AID MEASURES
General :
In all cases of doubt or when symptoms persist, seek medical attention. Have Safety Data Sheet information
available. Never give anything by mouth to an unconscious person.
Inhalation :
Remove to fresh air, keep patient warm and at rest. If breathing has stopped, administer artificial respiration.
Give nothing by mouth. If unconscious, place in recovery position and seek medical advice.
Eye contact :
Irrigate copiously with clean, fresh water for at least 15 minutes, holding the eyelids apart, and seek medical
advice.
Skin contact :
Remove contaminated clothing. Wash skin thoroughly with soap and water or use recognized skin cleaners.
Do NOT use solvents or thinners.
Ingestion :
If accidentally swallowed obtain immediate medical attention. Keep at rest. Do NOT induce vomiting.
KTH Paint Industries Sdn Bhd believes the statements; technical information and recommendations contained herein are reliable. They are given
without warranty or guarantee of any kind, expressed or implied.
________________________________________________________________________________________________________________________
REVISION : 01
DATE ISSUED : 20 JAN 2014 PREPARED BY : WCTEI
KTH Paint Industries Sdn Bhd
No.16 & 20, Emas Industrial Park, Pandamaran
42000 Port Klang, Selangor
SECTION 5. FIRE – FIGHTING MEASURES
Extinguishing media :
. Recommended: universal resistant foam, CO2, powder.
. Not to be used: water jet.
Recommendations :
. Fire will produce dense black smoke. Exposure to decomposition products may cause a Health Hazard.
Fire fighters should wear self-contained breathing apparatus.
. Water mist may be used to cool closed containers to prevent pressure build-up and possible
auto-ignition and explosion when exposed to extreme heat.
. Do not weld, expose to extreme heat or ignition sources, empty containers which have contained
flammable products.
. Do not allow run-off from fire fighting to enter drains or water courses.
SECTION 6. ACCIDENTAL RELEASE MEASURES
- Exclude sources of ignition and ventilate the area. Avoid breathing vapours by using appropriate respiratory
protective equipment. Refer to protective measures listed in sections 7 & 8.
- Contain and collect spillage with non-combustible absorbent materials, e.g. sand, earth, vermiculite,
diatomaceous earth and place in a suitable container for disposal in accordance with local regulations (see
section 13). Do not allow to enter drains or watercourses.
- Clean preferably with a detergent ; avoid use of solvents.
- If the product contaminates lakes, rivers or sewers, inform water authorities in accordance with local
regulations.
SECTION 7. HANDLING AND STORAGE
Handling: Keep the container tightly closed
Do not store near heat sources
Do not eat, drink during handling the products
Avoid inhalation or skin and eye contact
Work in a ventilated area
Storage: Store the container in such a way that security labels are readable all the time.
Keep away from heat or ignition sources
Keep away from oxidizing agents such as acid or alkaline chemicals
Previous opened containers should be carefully resealed.
Storage temperature below 4 º C or above 60 º C should be avoided all the time.
Recommended storage temperature is between 20-30 º C
Do not expose the container to direct sunlight.
SECTION 8. EXPOSURE CONTROL/PERSONAL PROTECTION
Engineering measures: Provide adequate ventilation.
Exposure limits: Not applicable
Personal Protective The usage or safety glasses or safety eyewear is recommended to protect against splashes
Equipment: Wear suitable clothing
Do not wear any contaminated clothing
Barrier creams may protect the exposed area of the skin.
Wear nitrile gloves
Never wear natural rubber gloves or PVC gloves
Under heavy exposure, respiratory protection may be needed
Ensure adequate ventilation all the time.
KTH Paint Industries Sdn Bhd believes the statements; technical information and recommendations contained herein are reliable. They are
given without warranty or guarantee of any kind, expressed or implied.
________________________________________________________________________________________________________________________
REVISION : 01
DATE ISSUED : 20 JAN 2014 PREPARED BY : WCTEI SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
Physical state Clear Liquid
Flash point -4C
Viscosity (at 27°C) 55 ± 10KU
Specific gravity 0.93
Solubility in water In-soluble
SECTION 10. STABILITY AND REACTIVITY
Chemical stability: stable under recommended storage and handling conditions. When exposed to high
temperatures, may produce hazardous decomposition products such as carbon monoxide, smoke,
oxides of nitrogen
SECTION 11. TOXICOLOGICAL INFORMATION
There are no data available on the preparation itself. Repeated or prolonged contact with the skin may cause removal
of natural fat from the skin resulting in non-allergic dermatitis and absorption through the skin.
SECTION 12. ECOLOGICAL INFORMATION
There is no data available.
Product should not be allowed to enter water courses, drains, sewers and should not be allowed to be spread on earth.
SECTION 13. DISPOSAL CONSIDERATIONS
Dispose the product in accordance with Local Authority requirements.
SECTION 14. TRANSPORT INFORMATION
UN number : UN1263
PROPER SHIPPING NAME : Paint
N.O.S. Technical Name : None
Class : 3
Subsidiary Class(es): None
Packing group : III
SECTION 15. REGULATORY INFORMATION
Classification of preparation:
R phrases: 36/38
S phrases: 41
SECTION 16. OTHER INFORMATION
It is advisable to read the respective R-phrases and S-phrases on the labels of the container prior handling the product.
This Material Safety Data Sheet contains information, which is only provided as a guide to the use of this product and is
correct to the best of our knowledge.KTH Paint Industries Sdn Bhd cannot offer any guarantee as to its accuracy or
exhaustiveness. All chemicals may present unforeseen risks and should be used with care.
Further, we cannot guarantee that the risks referred to the above are the only risk present
KTH Paint Industries Sdn Bhd believes the statements; technical information and recommendations contained herein are reliable. They are
given without warranty or guarantee of any kind, expressed or implied.