Tetrix 152 RC Plasma CW

单价	面议对比
询价	暂无
浏览	63
发货	MalaysiaSelangorSeri Kembangan
过期	长期有效
更新	2014-04-15 16:31

联系方式

加关注0

Personal第1年

资料未认证

保证金未缴纳

详细说明

Plasma DC welding machine
Set up using PC300.NET software or RC300 tablet PC
Standard 19-pole connection socket for signal exchange, e.g. collision protection
Prepared for connection of cold wire push/push
Operation requires a GDE2, GDE2.1 or GDE3 gas metering unit
Optional RINT X12 interface, BUSINT X11 industrial bus interface, PCINT X10 documentation interface (+ QDOC 9000 V2.0 software) and WELDQAS monitoring and documentation system
Parameters adjustable via interfaces: 256 JOBs each with 16 programs in program mode or RINT X12 welding current, secondary current, pulse time, pause time; BUSINT: main current, secondary current, pulse time, pulse pause time, fall time, rise time, frequency via control voltage
Pilot current can be set from 5–80 A (as long as torch and torch hose package are designed for it)
Plasma spotArc possible
Phase failure monitoring (in combination with BUSINTX11 ATCASE)
Phase failure monitoring (in conjunction with BUSINT ATCASE), wire stick detection (dependent on torch)
Emergency stop circuit in hardware for safety shut-down
Medium monitoring for shielding gas/pilot gas pressure and flow
Non-interchangeable connections for all mediums
Monitoring of water pressure and flow
3 x 400 V mains connection with neutral conductor (TN-S system)
5 m mains supply lead
100 % tested and free-welded

activArc –Precise, focussed arc with reduced heat input and deep penetration for optimum root fusion

	Tetrix 152 RC Plasma CW
	Plasma
Setting range for welding current	5 A - 150 A
Duty cycle at ambient temperature	25 °C	40 °C
100 %	150 A	150 A
Mains frequency	50 Hz / 60 Hz
Mains fuses (slow-blow)	3 x 16 A
Mains voltage (tolerances)	3 x 400 V (-25 % - +20 %)
Max. connected load	10.6 kVA
Recommended generator power	20.3 kVA
Dimensions, machine, LxWxH in mm	660 x 380 x 1110
Weight, machine	116 kg

点赞 0举报收藏 0评论 0

更多>本企业其它产品