- MIG/MAG standard welding machines, step switch controlled, gas-cooled
- Mobile, compact, sturdy construction with small housing dimensions
- M1.02: Twin-knob operation – setting of the welding voltage and wire-feed speed
- 4-roller wire feed, equipped for 0.8 mm + 1.0 mm steel wires
- 5 m mains supply lead with CEE 16 A plug
|
|
Mira 251 FKG |
|
|
|
MIG/MAG |
|
Setting range for welding current |
|
30 A - 250 A |
|
Duty cycle at ambient temperature |
|
25 °C |
40 °C |
20 % |
|
– |
250 A |
35 % |
|
250 A |
– |
100 % |
|
150 A |
125 A |
Open circuit voltage |
|
35 V |
|
Mains frequency |
|
50 Hz / 60 Hz |
|
Mains fuses (slow-blow) |
|
3 x 16 A |
|
Mains voltage (tolerances) |
|
3 x 400 V (-15 % - +15 %) |
|
Max. connected load |
|
9.6 kVA |
|
Recommended generator power |
|
13 kVA |
|
Drive rollers |
|
4 |
|
Wire speed |
|
1.5 m/min - 20 m/min |
|
Dimensions, machine, LxWxH in mm |
|
880 x 385 x 610 |
|
Weight, machine |
|
60 kg |
|
Switching steps |
|
8 |
|
Protection classification |
|
IP 23 |
|
Insulation class |
|
H |
|
Torch connection |
|
Euro torch connector |
|
Standards |
|
IEC 60 974-1; -5; -10 / CE / S-Safety sign / EMC class A |
- Setting of the wire feed speed on the wire feeder or on compact welding
- machine
- Twin-knob operation
- Setting of the welding voltage via step switch on welding machine
- Highlights
- MIG/MAG welding with solid and flux cored wire
- Wide range of functions: non-latched; latched; interval; spots
- Adjustable spot time, interval time and pause time