|
|
forceArc –Low-heat, directionally stable and powerful arc with deep penetration for the upper power range |
|
rootArc –Short arc with good modelling properties for easy gap-bridging and positional welding |
|
|
|
Taurus 401 Synergic S FDW |
|||||
|
|
|
MIG/MAG |
TIG |
MMA |
|||
|
Setting range for welding current |
|
5 A - 400 A |
5 A - 400 A |
5 A - 400 A |
|||
|
Duty cycle at ambient temperature |
|
25 °C |
40 °C |
25 °C |
40 °C |
25 °C |
40 °C |
|
100 % |
|
– |
400 A |
– |
400 A |
– |
400 A |
|
Open circuit voltage |
|
80 V |
|||||
|
Mains frequency |
|
50 Hz / 60 Hz |
|||||
|
Mains fuses (slow-blow) |
|
3 x 35 A |
|||||
|
Mains voltage (tolerances) |
|
3 x 400 V (-25 % - +20 %) |
|||||
|
Max. connected load |
|
17.5 kVA |
13.1 kVA |
18.2 kVA |
|||
|
Recommended generator power |
|
25 kVA |
|||||
|
Dimensions, machine, LxWxH in mm |
|
1100 x 455 x 1000 |
|||||
|
Weight, machine |
|
118 kg |
|||||
|
Protection classification |
|
IP 23 |
|||||
|
Insulation class |
|
H |
|||||
|
Standards |
|
IEC 60 974-1; -10 / CE / S-Safety sign / EMC class A |
|||||
- Selection of the welding task from the JOB list
- Setting of all welding parameters and welding data displays on the wire feed unit or on compact welding machine
- Setting of the welding parameters via welding sequence with LED user menu
- Synergic – one-knob operation
- No settings required on decompact welding machine
- Highlights
- Easiest possible selection of the preset JOBs (welding tasks) for the different materials, gas types and wire diameters via JOB list
- Synergic – one-knob operation
- forceArc, rootArc and standard MIG/MAG welding with solid and flux cored wire, MMA and TIG lift arc welding, air arc gouging
- Extensive remote control options
