- Inverter welding machine, DC, water-cooled
- Multiprocess: MIG/MAG, MMA and air arc gouging
- Basic: Twin-knob operation – setting of the welding voltage and wire-feed speed at the wire feed unit
- Tool-free polarity selection: ideal for welding self-shielding flux cored wires
- Protective earth monitoring (PE)
- 4-roll drive. Equipped for 1.0 mm + 1.2 mm steel wires
- Powerful cooling system with centrifugal pump, pressure switch and large 12 l tank. Temperature-controlled pump and fan
- Connection capability for remote control
- 5 m mains supply lead
- Available as multi-voltage version (230 V, 400 V, 480 V) as option
Taurus 501 Basic FKW |
|||||||
|
|
MIG/MAG |
TIG |
MMA |
|||
Setting range for welding current |
|
5 A - 500 A |
5 A - 500 A |
5 A - 500 A |
|||
Duty cycle at ambient temperature |
|
25 °C |
40 °C |
25 °C |
40 °C |
25 °C |
40 °C |
60 % |
|
– |
500 A |
– |
500 A |
– |
500 A |
65 % |
|
500 A |
– |
500 A |
– |
500 A |
– |
100 % |
|
460 A |
430 A |
460 A |
430 A |
460 A |
430 A |
Open circuit voltage |
|
80 V |
|||||
Mains frequency |
|
50 Hz / 60 Hz |
|||||
Mains fuses (slow-blow) |
|
3 x 35 A |
|||||
Mains voltage (tolerances) |
|
3 x 400 V (-25 % - +20 %) |
|||||
Max. connected load |
|
24.6 kVA |
18.9 kVA |
25.3 kVA |
|||
Recommended generator power |
|
35 kVA |
|||||
Drive rolls |
|
4 |
|||||
Wire speed |
|
0.5 m/min - 24 m/min |
|||||
Dimensions, machine, LxWxH in mm |
|
1100 x 455 x 1000 |
|||||
Weight, machine |
|
118 kg |
|||||
Protection classification |
|
IP 23 |
|||||
Insulation class |
|
H |
|||||
Torch connection |
|
Euro torch connector |
|||||
Cooling output |
|
1500 W (1l/min) |
|||||
Tank capacity |
|
12 l |
|||||
Flow rate |
|
5 l/min |
|||||
Max. output pressure |
|
3.5 bar |
|||||
Standards |
|
IEC 60 974-1; -5; -10 / CE / S-Safety sign / EMC class A |
- No electronics in the wire feeder
- Setting of operating point, wire speed and non-latched/latched on the wire feeder
- Twin-knob operation
- Setting of all welding parameters and welding data displays on the welding machine
- Highlights
- MIG/MAG welding with solid and flux cored wire, MMA welding, air arc gouging