Phoenix 401 Progress puls D FDW Welding

单价	面议对比
询价	暂无
浏览	53
发货	MalaysiaSelangorSeri Kembangan
过期	长期有效
更新	2014-03-12 17:20

联系方式

加关注0

Personal第1年

资料未认证

保证金未缴纳

详细说明

Inverter welding machine, DC, pulse, water-cooled, with double wire feeder
Multiprocess: MIG/MAG, TIG lift arc, MMA, air arc gouging
Decompact, mobile, can be lifted by crane and moved by fork lift
Progress: All welding parameters and functions are set and displayed on the wire feeder, one-knob operation (Synergic) – easy setting of operating point, pre-programmed JOBs (welding tasks), selection via JOB list
More effective welding with forceArc and rootArc technology
Connection capability for remote control and function torch
4-roller wire feed equipped for 1.0 mm + 1.2 mm steel wires
Powerful cooling system with centrifugal pump, pressure switch and large 12 l tank. Temperature-controlled pump and fan
Two welding tasks with one power source. For alternating welding of root and final passes, solid and flux cored wire, or a variety of materials or wire thicknesses
No roller changing or torch conversion necessary. Conversion times are reduced considerably
The torch trigger is used for changeover between the wire feeds; no special torch or changeover on the machine required!
5 m mains supply lead
Available as multi-voltage version (230 V, 400 V, 480 V) as option

Pulsed arc –Controlled, short circuit-proof pulsed arc for all positions

forceArc –Low-heat, directionally stable and powerful arc with deep penetration for the upper power range

rootArc –Short arc with good modelling properties for easy gap-bridging and positional welding

	Phoenix 401 Progress puls D FDW
		MIG/MAG		TIG		MMA
Setting range for welding current		5 A - 400 A		5 A - 400 A		5 A - 400 A
Duty cycle at ambient temperature		25 °C	40 °C	25 °C	40 °C	25 °C	40 °C
100 %		–	400 A	–	400 A	–	400 A
Open circuit voltage		80 V
Mains frequency		50 Hz / 60 Hz
Mains fuses (slow-blow)		3 x 35 A
Mains voltage (tolerances)		3 x 400 V (-25 % - +20 %)
Max. connected load		17.5 kVA		13.1 kVA		18.2 kVA
Recommended generator power		25 kVA
Dimensions, machine, LxWxH in mm		1100 x 680 x 1000
Weight, machine		147 kg
Protection classification		IP 23
Insulation class		H
Cooling output		1500 W (2l/min)
Tank capacity		12 l
Flow rate		20 l/min
Max. output pressure		4.5 bar
Standards		IEC 60 974-1; -10 / CE / S-Safety sign / EMC class A

点赞 0举报收藏 0评论 0

更多>本企业其它产品