Phoenix 405 Progress puls TDM Welding

单价	面议对比
询价	暂无
浏览	41
发货	MalaysiaSelangorSeri Kembangan
过期	长期有效
更新	2014-03-12 17:19

联系方式

加关注0

Personal第1年

资料未认证

保证金未缴纳

详细说明

Inverter welding machine, DC, pulse
Multiprocess: MIG/MAG, TIG lift arc, MMA, air arc gouging
Modular (gas- or water-cooled)
Very high power reserves enable use of long intermediate hose packages:
Portable, decompact
Progress: All welding parameters and functions are set and displayed on the wire feeder, one-knob operation (Synergic) – easy setting of operating point, pre-programmed JOBs (welding tasks), selection via JOB list
More effective welding with forceArc and rootArc technology
Tool-free polarity selection: ideal for welding self-shielding flux cored wires
Connection capability for remote control, function torch, cooling unit
Protective earth monitoring (PE)
Cooling unit can be changed with no need for tools or specialist staff and no need to open the welding machine
4-roller wire feed equipped for 1.0 mm + 1.2 mm steel wires
5 m mains supply lead
Trolley and cooling unit optionally available

Pulsed arc –Controlled, short circuit-proof pulsed arc for all positions

forceArc –Low-heat, directionally stable and powerful arc with deep penetration for the upper power range

rootArc –Short arc with good modelling properties for easy gap-bridging and positional welding

	Phoenix 405 Progress puls TDM
		MIG/MAG		TIG		MMA
Setting range for welding current		5 A - 400 A		5 A - 400 A		5 A - 400 A
Duty cycle at ambient temperature		25 °C	40 °C	25 °C	40 °C	25 °C	40 °C
100 %		400 A	400 A	400 A	400 A	400 A	400 A
Open circuit voltage		80 V
Mains frequency		50 Hz / 60 Hz
Max. connected load		17.5 kVA		13.1 kVA		18.2 kVA
Recommended generator power		25 kVA
Drive rollers		4
Wire speed		0.5 m/min - 24 m/min
Dimensions, machine, LxWxH in mm		624 x 298 x 535
Wire feeder LxWxH in mm		690 x 300 x 410
Weight, machine		41 kg
Weight, wire feeder		15.1 kg
Weight, cooling unit		16.5 kg
Protection classification		IP 23
Insulation class		H
Torch connection		Euro torch connector
Cooling output		1000 W (1l/min)
Tank capacity		4 l
Flow rate		5 l/min
Max. output pressure		3.5 bar
Standards		IEC 60 974-1; -10 / CE / S-Safety sign / EMC class A

点赞 0举报收藏 0评论 0

更多>本企业其它产品