|
Pulsed arc –Controlled, short circuit-proof pulsed arc for all positions |
forceArc –Low-heat, directionally stable and powerful arc with deep penetration for the upper power range |
rootArc –Short arc with good modelling properties for easy gap-bridging and positional welding |
|
Phoenix 355 Progress puls TDM |
||||||
|
|
MIG/MAG |
TIG |
MMA |
|||
Setting range for welding current |
|
5 A - 350 A |
5 A - 350 A |
5 A - 350 A |
|||
Duty cycle at ambient temperature |
|
25 °C |
40 °C |
25 °C |
40 °C |
25 °C |
40 °C |
60 % |
|
350 A |
350 A |
350 A |
350 A |
350 A |
350 A |
100 % |
|
300 A |
300 A |
300 A |
300 A |
300 A |
300 A |
Open circuit voltage |
|
80 V |
|||||
Mains frequency |
|
50 Hz / 60 Hz |
|||||
Max. connected load |
|
12.7 kVA |
9.7 kVA |
13.8 kVA |
|||
Recommended generator power |
|
13.1 kVA |
17.2 kVA |
18.7 kVA |
|||
Drive rollers |
|
4 |
|||||
Wire speed |
|
0.5 m/min - 24 m/min |
|||||
Dimensions, machine, LxWxH in mm |
|
625 x 300 x 535 |
|||||
Wire feeder LxWxH in mm |
|
690 x 300 x 410 |
|||||
Weight, machine |
|
41 kg |
|||||
Weight, wire feeder |
|
15.1 kg |
|||||
Weight, cooling unit |
|
16.5 kg |
|||||
Protection classification |
|
IP 23 |
|||||
Insulation class |
|
H |
|||||
Torch connection |
|
Euro torch connector |
|||||
Cooling output |
|
1000 W (1l/min) |
|||||
Tank capacity |
|
4 l |
|||||
Flow rate |
|
5 l/min |
|||||
Max. output pressure |
|
3.5 bar |
|||||
Standards |
|
IEC 60 974-1; -5; -10 / CE / S-Safety sign / EMC class A |