The Continuous slot screen is manufactured by wrapping a profile wire cylindrical around longitudinal placed support rods creating a V shaped non clogging slot opening.
Depending on the type of wire used and the slot opening, the open area of a wedge wire screen can vary between 10% and 70% of the total area.
The average opening area of a water well screen varies from 35% to 45% compared with 5% to 15% on average of a other screens (e.g. perforated or bridge screen).
In the case of support grids, the filtering area can be up to a 70% of total area, depending on the material used and the slot.
The continuos slot water screen has several advantages compared to other screens such as bridge slot screen or perforated screen.
A larger opening (filtering) area of a wedge wire screen leads to superior performance of a water well compared against the installation of other types of screens.
Moreover a wedgewire filter for water well are self-cleaning (go no go), thus, prevents losses due to friction as well as losses associated with pumping sand.
Also, a continuous slot wedgewire water well screen eliminate the problems associated with fine sands, thus, increasing the life of the pumping equipment.
NB 1.5", 2", 3", 4", 6", 8", 10", 12", 14",16"
Slot (mm) 0.15,0.25, 0.50, 0.75,1.00,1.50,2.00,3.00
Lengths 6 Mts. & 3 Mts.
Grades Different grades suitable for tube well depths up to 300 ft., 600 ft., 900 ft. and 1500 ft.
Material Low Carbon Galvanized Steel ( LCG ) and Stainless Steel ( SS-304 )
End Connection Plain beveled ends for butt welding or threaded.