The unit is designed for heating, drying and refining of transformer oil from mechanical impurities, water and acids. It is also intended for insulation restoration of current and voltage oil-filled transformers, for solid insulation cleaning of power transformers, for insulation drying of power transformers, transformer oil regeneration with granular synthetic or natural adsorbents, regeneration of granular synthetic or natural adsorbents with vacuum, for
regeneration and refining of other types of mineral and synthetic oil.
ZHONGNENG TRANSFORMER OIL REGENERATION system is designed for degassing, solid particle removal, nitrogenation and heating of transformer oil, filled into power transformers above 110KV.
The oil processing station can be used for heating of oil filled electric equipment with hot transformer oil, as well as for vacuumizing power transformers.
The ZYD-I-M can be used for installation, repair and operation of power equipment.
Application of the unit in closed rooms required exhaust ventilation.
Features:
1. Two pumps: vacuum pump and booster pump
2. Three-stage filter system
3. Z-shape Heater to make the heating uniformity
4. Installing oil-level floating ball and double-infrared liquid level automatic controller to control the oil level
5. Foam sensor to avoid oil leaking
6. Temperature Controller to protect the machine
7. Suitable oil filtration machine for high voltage transformer
8. Two separators: large filtration area, high capacity of holding impurities
9. Two vacuum separator to increase separating size and time and ensure the drying degree and improve dielectric strength which is higher than 75 KV.
10. Doing online oil purification of substations over 110 KV.
11. Independent function of vacuum oil filling and drying.
12. Duplex stereo flash evaporation technology
13. Equipped with pressure protective system and interlocked protective system to connect oil pump, heater and liquid level controller. If there has any fault, the purifier will be power off automatically.
14. Saving energy and time
2. Three-stage filter system
3. Z-shape Heater to make the heating uniformity
4. Installing oil-level floating ball and double-infrared liquid level automatic controller to control the oil level
5. Foam sensor to avoid oil leaking
6. Temperature Controller to protect the machine
7. Suitable oil filtration machine for high voltage transformer
8. Two separators: large filtration area, high capacity of holding impurities
9. Two vacuum separator to increase separating size and time and ensure the drying degree and improve dielectric strength which is higher than 75 KV.
10. Doing online oil purification of substations over 110 KV.
11. Independent function of vacuum oil filling and drying.
12. Duplex stereo flash evaporation technology
13. Equipped with pressure protective system and interlocked protective system to connect oil pump, heater and liquid level controller. If there has any fault, the purifier will be power off automatically.
14. Saving energy and time
Please contact:Kris A
Email:aijiezn@gmail.com
oilpurifier.kris@zhongnengcq.cn
Tel:0086-23-68829592
Fax:0086-23-86197078
Moible:0086-15223801122
MSN:aijie_a_j@live.cn
Skype:aijie_a_j
Website:http://amylee12.diytrade.com
Website:http://oilpurifying.soocuu.com
Wesite:http://www.oilrecondition.com
Website:http://www.zhongnengcq.cn
Blog:http://oilfiltering.blog.com/
Vedio: http://www.youtube.com/watch?v=yBsT4m35OtY
Vedio: http://www.youtube.com/watch?v=XN8zjs D6hsE
Vedio: http://www.youtube.com/watch?v=ZPcBv3ODb4o
Vedio: http://www.youtube.com/watch?v=VIBq6cbs72o