We produce all kind of dust collector, various selections of filter media, sizes and configurations, in application ranging
The FABRI PAK II is a bag filter used for automatic continuous or programmed air cleaning done by means of compressed air. The dust laden air or gases enter the FABRI PAK inside the bag filter chamber from the top against a plenum which distributes the gases throughout the whole filter bag chamber.These gases then pass through the filter bags. The dust is retained on the outside of the bag while the clean air passes through to the inside where it is led up to the top chamber via the venturi pipes. Extraction from the chamber to the outside can be done on either of the two sides adjacent to the compressed air receiver.
There is a metal cage on the inside of the bags that acts as a support and stops them from collapsing. Cleaning the bags or blowing off the dust which is being held on the bag is done by means of an industrial compressed air supply. This compressed air can come from either a compressor which is supplied exclusively for the bag filter or from the factory’s own air lines. The receiver (compressed air collector) is a lung type which means that the compressor does not have to run continu