Suction Cups
Vacuum Ejectors
Vacuum Filters
Vacuum Switches
Vacuum Regulators
Non-contact Vacuum Pads
ZP2V
Machine builders using vacuum for handling or pick and place applications now have an energy saving option with our new Series ZP2V vacuum saving valve. Developed initially for the semiconductor market, these new valves are designed to shut down the suction line when any leakage is detected from the vacuum pad not being fully aligned with the work piece or even when the work piece is simply missing. By effectively stopping the air suction when the system recognizes any irregularities, the energy used in making this vacuum is kept to an absolute minimum. And, without the need for a work piece detection mechanism - which often use mechanical moving parts - those unwanted surface scratches or marks on the work piece are now a thing of the past.Ideal for use as either a stand-alone single vacuum pad or for multiple vacuum pad applications where the vacuum pressure loss is reduced to a minimum and the work piece remains held by the rest of the operating pads, ZP2V users will also save money and time by eliminating the need for expensive sensors or a programmable logic controller (PLC) plus dramatically reduced labour costs when altering the control circuit to accommodate a different shaped work piece.
Machine builders using vacuum for handling or pick and place applications now have an energy saving option with our new Series ZP2V vacuum saving valve.
ZP3
We continue to suck up the competition in the vacuum sector with the launch of our new ZP3 Series, which complements the ZP and ZP2 Series. Available in three options - flat, bellow and flat with a groove for easy work-piece removal - the ZP3 also offers a range of diameters from Ø1.5mm to Ø16mm. The pad length has been shortened by up to 9mm and a new Ø2mm tubing port means the ZP3 requires up to 75% less piping space. Its joint construction design connects the pad with the adapter and a new internal shape guarantees both sections fit perfectly. In addition, a new fixing boss (lateral vacuum inlet) offers easy mounting and repeatability leading to labour savings. The buffer body has also been reduced in length by up to 55.5mm and has an additional 3mm short stroke type. Available in a wide range of materials and piping selections, which includes a new male thread option, the ZP3 can be used for a variety of vacuum applications from the transfer of general work to semiconductor and chemical work.
We continue to suck up the competition in the vacuum sector with the launch of our new ZP3 Series, which complements the ZP and ZP2 Series.
Adaptor & Cup-Vertical Entry
The ZPT series vacuum cups are available in 16 diameters from 2 to 125mm, 6-cup materials, and 4-cup designs (flat, flat with ribs, deep and bellows), to suit multiple applications. Vertical vacuum entry connections can be made via one-touch fittings or threaded connections. Optional buffers can be ordered with up to 50 mm stroke
The ZPT series vacuum cups are available in 16 diameters from 2 to 125mm, 6-cup materials, and 4-cup designs (flat, flat with ribs, deep and bellows).
Adaptor & Cup-Lateral Entry
w/One-touch Fitting
ZPR series vacuum cups are available in 12 diameters from 2 to 50mm, 6 cup materials, and 4 cup designs, offering a wide selection to choose from. The lateral vacuum entry, comes with SMC's acclaimed built in One-touch fittings and is available with or without buffer.
ZPR series vacuum cups are available in 12 diameters from 2 to 50mm, 6 cup materials, and 4 cup designs, offering a wide selection to choose from.
Adaptor & Cup-Lateral Entry
ZPX and ZPY series vacuum cups are available in 16 diameters from 2mm to 125mm, making it ideal for heavy weight material or objects with a large surface area. The lateral vacuum entry is supplied threaded or with optional hose barb, and with or without buffer. This versatile design can be used for a wide number of applications. 6-cup materials in 4 designs give great freedom to the designer when solving application problems. Using special materials in the cups such as conductive materials that help ensure static discharge further broaden their uses.
ZPX and ZPY series vacuum cups are available in 16 diameters from 2mm to 125mm, making it ideal for heavy weight material or objects with a large surface area.
Suction Cups only
ZP series vacuum cups are available in 19 diameters from 2 to 200mm, 6-cup materials, and 4 cup designs, offers a wide selection to choose from. The 4-cup designs flat, flat with ribs, deep and bellows are standard, but if these don't meet your application requirements, contact us about your special application. Our engineers have custom made many designs and shapes using a variety of materials.
ZP series vacuum cups are available in 19 diameters from 2 to 200mm, 6-cup materials, and 4 cup designs, offers a wide selection to choose from.
ZP2
Following the launch of our new Series ZP2 range of vacuum pads, we can now offer customers a complete one-stop-shop solution. Developed as part of our growing range of vacuum related products this new Series ZP2, when combined with our existing ZP and ZP2V vacuum pad ranges, provides us with a formidable portfolio of pad options to meet even the most challenging of handling and transfer needs. Series ZP2 vacuum pads are available in a wide range of sizes, shapes and materials and they are suitable for a variety of applications.
Following the launch of our new Series ZP2 range of vacuum pads, we can now offer customers a complete one-stop-shop solution. Developed as part of our growing .
ZB
Requests for a vacuum unit with fast workpiece absorption and improved transfer application performance have now been answered with the launch of our new compact vacuum ejector and pump unit - Series ZB. Developed initially for wafer and chip transfer applications, Series ZB is around 25% smaller than our alternative vacuum units and it´s also considerably lighter - at only 46g for a single unit without sensor. Thanks to these reductions in size and weight, the ZB unit can now be mounted directly onto a machine´s moving component and as close as possible to the transfer workpiece - dramatically improving the vacuum absorption performance. Series ZB has also been constructed with separate vacuum and pressure paths which effectively reduce the chance of dust collecting in the filter element being discharged into the surrounding atmposphere via the units exhaust. Additional ZB features and options include a supply valve with latching specifications, a digital vacuum switch, with copy function, where up to 10 switches can be set simultaneously thereby saving installation time and potentially annoying individual input setting mistakes and the use of simple one-touch-fittings to connect a suction filter and silencer.
Requests for a vacuum unit with fast workpiece absorption and improved transfer application performance have now been answered with the launch of our new compac... Learn more
ZK2
We are delighted to introduce our ZK2 Series vacuum unit, developed in response to increasing customer demand for improved evacuation performance and energy efficiency. Our new ZK2 provides an improved ejector/pump vacuum unit with extremely efficient air and power consumption, thanks to the introduction of an energy saving digital pressure switch, which decreases air consumption by 90%. A more effective two-stage ejector further increases suction flow and reduces air consumption. To prevent work pieces from dropping, the Series ZK2 features a Dual 2 port release/supply valve. Its clever all in one design makes this new product lighter and more compact than previous models, simplifying installation and maintenance. The ZK2 is suitable for several applications such as transfer, panel conveyor and packaging/unpacking and is perfect for tight spaces where ejector space is limited.
We are delighted to introduce our ZK2 Series vacuum unit, developed in response to increasing customer demand for improved evacuation performance and energy eff... Learn more
ZH
Lightweight, point-of-use ZH and ZU series vacuum generators combine design simplicity with high performance. Simply plug an air supply tube in one end, and vacuum is ready at the other end. The slim ZU generators are extra compact. The ZH and ZU immediate response may be quicker than central vacuum systems. Also, these generators are often smaller and lighter than the bulky vacuum lines used in central vacuum systems. A built-in exhaust silencer keeps generator noise to a minimum. Available in four nozzle diameters and a number of port sizes.
Lightweight, point-of-use ZH and ZU series vacuum generators combine design simplicity with high performance. Simply plug an air supply tube in one end, and v... Learn more
ZL
The multi-stage ZL series is a high-efficiency vacuum generator, which operates at 150% efficiency (compared to about 40% for other units). For each scfm of compressed air it consumes, the ZL generates an incredible 1.587 scfm of suction flow. The ZL is available with a built-in vacuum switch with digital readout for design flexibility. Other features include built-in suction filter, exhaust silencer, and one-touch tube fittings. Its' compact design allows for mounting from three sides.
The multi-stage ZL series is a high-efficiency vacuum generator, which operates at 150% efficiency (compared to about 40% for other units). For each scfm of co... Learn more
ZM
The ZM series is an all-in-one vacuum generator, complete with internal suction filter, exhaust silencer, supply and break valve, and vacuum switch. Its dual-stage nozzle design increases suction flow by 40% over single-stage generators, yet its compact size makes it suitable for many different applications. ZM series generators also boast a strong vacuum break pressure for quick cycle times. Available in standalone or manifold configurations.
The ZM series is an all-in-one vacuum generator, complete with internal suction filter, exhaust silencer, supply and break valve, and vacuum switch. Its dual-... Learn more
ZQ
When you already have one of the lightest and narrowest space saving ejector systems on the market, it´s difficult to see how you can improve it. But, our R&D engineers have once again come up with another great idea. By simply replacing the ejectors existing pressure switch with our ultra thin ZSE 10 digital pressure switch, input setting errors are dramatically reduced and with the units copy function, multiple stations can be easily copied and set from the master unit. Further performance benefits of this new combination are improved multi angled indicator visibility, easier operational handling (by replacing trimmers with buttons) and reduced energy consumption, by up to 20%, thanks to the units power saving function.
When you already have one of the lightest and narrowest space saving ejector systems on the market, it´s difficult to see how you can improve it. But, our R&D e... Learn more
ZR
The larger ZR is a single-stage vacuum generator. The modular design allows the user to choose only the components needed for the application. The ZR is available with a combination of generator unit, supply/release valve unit, pressure switch unit, and suction filter unit. Order without the generator unit for use as a filter and valve assembly for house vacuum systems. Special function plates allow the use of shop air to create the vacuum, and nitrogen for the blow-off. Available in standalone or manifold configurations.
The larger ZR is a single-stage vacuum generator. The modular design allows the user to choose only the components needed for the application. The ZR is avai... Learn more
ZU series
ZU series vacuum generators combine design simplicity with high performance. Simply plug an air supply tube in one end, and vacuum is ready at the other end. Also, these generators are often smaller and lighter than the bulky vacuum lines used in central vacuum systems. The slim ZU generators are extra compact. A built-in exhaust silencer keeps generator noise to a minimum. Available in four nozzle diameters and a number of port sizes.
ZU series vacuum generators combine design simplicity with high performance. Simply plug an air supply tube in one end, and vacuum is ready at the other end.
ZX
The ZX is a single-stage vacuum generator. The modular design allows the user to choose only the components needed for the application. The ZX is available with a combination of generator unit, supply/release valve unit, pressure switch unit, and suction filter unit. Order without the generator unit for use as a filter and valve assembly for house vacuum systems. Special function plates allow the use of shop air to create the vacuum, and nitrogen for the blow-off. Available in standalone or manifold configurations.
The ZX is a single-stage vacuum generator. The modular design allows the user to choose only the components needed for the application. The ZX is available
ZFC, In-line Air Filter with
One-touch Fitting (NEW)
Wide range of applicable tubing.
Lock mechanism.
Easy piping.
Interchangeability.
Flexible mounting orientation.
Lightweight.
Variety of colours for an easy visualization.
ZFC, In-line Air Filter with
One-touch Fitting, Different...
Different bores on IN and OUT sides.
Lock mechanism.
Easy piping.
Interchangeability.
Flexible mounting orientation.
Lightweight.
Variety of colours for an easy visualization.
ZFZ, Compact Resin Air Suction
Filter
Compact filter for vacuum suction.
Improved alcohol resistance.
Dual use for positive and negative pressures.
Reduced pressure loss.
Improved user friendliness.
ZFA, Air Suction Filter
Compact and lightweight.
Adaptable for a manifold application.
Large filter element surface.
Easily replaced filter element.
Mountable in any direction.
ZFB, Air Suction Filter
w/One-touch Fittings
Unrestricted 360° piping tube mounting.
Easily replaced filter element.
One-touch tube installation and removal.
Lightweight and compact.
ZFC, Air Suction Filter with
One-touch Fitting
A new smaller model is added to ZFC series.
Installation space is reduced to 1/3 of the existing type.
Applicable for applications requiring high response due to the reduced internal volume.
Wide variety of one-touch connection ports.
Longer element life than the competitors.
Easy element replacement.
Without bracket type is now available for ZFC05, ZFC10 and ZFC20.
ZSE10
Our new ZSE10(F)/ISE10 pressure switches really do fit the bill when lack of available machine space is an issue. Designed specifically with space savings in mind, and measuring only 9.8 mm width, they offer similar performance to our popular ZSE30A/ISE30A models but require around 50% less mounting space. Further features of these switches include a copy function where the setting of the master sensor can be copied on up to 10 slave sensors simultaneously resulting in reduced setting time and human setting errors. Also, all settings can be protected against unwanted manipulation using the switch's password setting function and with their improved multi -angle direction visibility; vacuum suction and pressure checks can be made at a glance. Available in direct, panel and DIN rail mounting options and with side or rear piping directions, these digital pressure switches really lend themselves to multiple switch applications when panel space is restricted. And in keeping with our commitment to help save energy, these switches are also extremely energy efficient as they consume around 20% less power thanks to their in-built power saving function.
Our new ZSE10(F)/ISE10 pressure switches really do fit the bill when lack of available machine space is an issue. Designed specifically with space savings in mi... Learn more
ZSE30A, 2 Color Display High
Precision Digital Pressure S...
Series ZSE30 is a high-precision, 2-color display digital pressure switch for vacuum. It has raised rubber button controls that are clearly set apart, simple to operate and soft to the touch. Plug in type connectors take the burden out of wiring work and maintenance. Four different display settings are available.
Series ZSE30 is a high-precision, 2-color display digital pressure switch for vacuum. It has raised rubber button controls that are clearly set apart, simple ... Learn more
ZSE40A
based on our successful ZSE/ISE 40 Series, our new high precision digital pressure switch, Series ZSE40 A(F) / ISE40A, with dual colour display, offers even more high performance features. Now available with either NPN or PNP dual open collector outputs, or with the addition of an additional analogue output (voltage or current), the sensors improved copy function also allows you to simultaneously set up to 10 slave monitors whilst setting the master. With a simple to follow three step setting process and the addition of a password setting function, potential errors, lengthy setting time and unwanted manipulation are kept to an absolute minimum. Further features of the CE, UL/CSA and RoHS compliant ZSE40 A(F) / ISE40A include a power saving function, which reduces energy consumption by up to 20%, various piping options and direct or panel mounting capabilities.
based on our successful ZSE/ISE 40 Series, our new high precision digital pressure switch, Series ZSE40 A(F) / ISE40A, with dual colour display, offers even mor... Learn more
ZSE1
The ZSE1 series is a compact, vacuum pressure switch available in a single setting with hysteresis adjustment, a double setting/ double output type or an analog output type with hysteresis adjustment. The ZSE1 is lightweight and the optional plug-in connector makes wiring easy and simple.
The ZSE1 series is a compact, vacuum pressure switch available in a single setting with hysteresis adjustment, a double setting/ double output type or an analo... Learn more
ZSE2
The ZSE2 series is a compact, pressure switch (for vacuum pressure) and can be integrated with ZX or ZR vacuum systems. The ZSE2 series pressure switch has a quick response time of 10mS and the plug connector option makes wiring easy and simple.
The ZSE2 series is a compact, pressure switch (for vacuum pressure) and can be integrated with ZX or ZR vacuum systems. The ZSE2 series pressure switch has a ... Learn more
ZSE3
The ZSE3 series is a digital pressure switch (for vacuum pressure) with LCD readout for general pneumatics purposes. The ZSE3 digital pressure switch allows the calibration of two independent outputs. Modular version can be integrated with ZX system.
The ZSE3 series is a digital pressure switch (for vacuum pressure) with LCD readout for general pneumatics purposes. The ZSE3 digital pressure switch allows ... Learn more
ZSM1
The ZSM1 series diaphragm type vacuum switch is available in a solid state non-contact or a reed type design. The ZSM1 has a response time of 100 ms. It is lightweight, compact and has a long life. The ZSM1 has a standard shield plate that prevents external interference.
The ZSM1 series diaphragm type vacuum switch is available in a solid state non-contact or a reed type design. The ZSM1 has a response time of 100 ms. It is lig... Learn more
ZSE80
To compliment and extend the existing SMC Digital Pressure Switch ranges, we are pleased to unveil our new Series ZSE/ISE 80 which has been specifically designed for use with a wide range of fluids thanks to its improved, corrosions resistant stainless steel, wetted part construction. Pressure ranges can easily be monitored via its dual colour display either in Vacuum (-0.1 to 0 MPa), Compound (-0.1 to +0.1MPa) or Positive (-0.1 kPa to +1 MPa, -0.1 kPa to +2 MPa) regimes, dependant on its application, and with the option of an analogue current output, this new switch makes remote location mounting a perfect selection.
To compliment and extend the existing SMC Digital Pressure Switch ranges, we are pleased to unveil our new Series ZSE/ISE 80 which has been specifically designe... Learn more
ZSE30
Series ZSE30 is a high-precision, 2-color display digital pressure switch for vacuum. It has raised rubber button controls that are clearly set apart, simple to operate and soft to the touch. Plug in type connectors take the burden out of wiring work and maintenance. Four different display settings are available.
Series ZSE30 is a high-precision, 2-color display digital pressure switch for vacuum. It has raised rubber button controls that are clearly set apart, simple ... Learn more
IRV
The IRV series vacuum regulator was developed to upgrade the design of the T203 model in a more compact size and to expand the range of vacuum regulators. Thread sizes available include Rc(PT), NPT and G(PF). The new and improved IRV10/20 series offers single sided connections for ease of installation and panel mounting. Built-in one-touch fittings include 6, 8, and 10mm and also 1/4", 5/16", and 3/8" for both fitting types elbow or straight.
The IRV series vacuum regulator was developed to upgrade the design of the T203 model in a more compact size and to expand the range of vacuum regulators. Threa... Learn more
ITV
Series ITV electro-pneumatic and electronic vacuum regulators control air/vacuum pressure steplessly in proportion to an electric signal. They are light weight in design with a bright and easy to read LED display. The monitor output is available either as analog output or switch output. The ITV series is IP65 equivalent.
Series ITV electro-pneumatic and electronic vacuum regulators control air/vacuum pressure steplessly in proportion to an electric signal. They are light weight... Learn more
XT661, Cyclone Pad
